NEN 3840 & ENSR
NEN 3840 is the Dutch standard for safe work on and near high-voltage installations (above 1000 VAC / 1500 VDC). In addition, the Electrical Network Safety Rules (ENSR) are often an important factor. This is not a standard but a set of rules drawn up by grid operators and other directly interested parties, and is more practical in nature.
Useful NEN 3840 - ENSR tools
NEN 3840 instructions tool
Use this tool as an aid when drafting an instruction letter for IV, WV, VP and VOP according to NEN 3840.
Open the NEN 3840 instructions tool →NEN 3840 design standard changes tool
Use this tool to gain insight into the changes that are pending due to the NEN 3840 design standard and what this means for your organization.
Open the NEN 3840 changes tool →NEN 3840 supervision tool
Use this tool as an aid when assessing whether supervision is required according to NEN 3840.
Open the NEN 3840 supervision tool →ENSR HV designation tool
Use this tool when drafting instructions for work on and near high-voltage installations according to the ENSR.
Open the ENSR HV instructions tool →ENSR supervision tool
Use this tool when assessing whether supervision is mandatory for work on and near high-voltage installations according to the ENSR.
Open the ENSR supervision tool →NEN 3840 / ENSR
Overview of possible NEN 3840 changes
View possible changes to the NEN 3840 design standard, including the role of the Operational Installation Manager (OIV). In the article you will also find our changes tool.
Read more →What is the difference between NEN 3840 and NEN 3140?
NEN 3140 is about low-voltage installations (up to 1000 V AC); NEN 3840 is about high and medium voltage. The standards differ in scope, procedures and instructions.
Read more →What is the difference between the ENSR and NEN 3840?
The ENSR are company- or grid operator-specific safety regulations for high-voltage installations, supplementing NEN 3840.
Read more →What are the duties of the IV in NEN 3840?
The IV is responsible for the safe condition and management of the high-voltage installation, instructions and compliance with safety procedures.
Read more →What is the VOP allowed to do in NEN 3840 HV installations?
The VOP may perform limited tasks near high-voltage installations, such as simple operating actions, visual inspections, cleaning or painting – always under supervision and after instruction. Working on HV installations is not permitted.
Read more →How is supervision arranged in HV NEN 3840 and ENSR environments?
NEN 3840 includes continuous supervision and periodic supervision (once every 4 hours). The ENSR distinguishes immediate supervision and personal supervision. Which type of supervision is required depends on the situation and the designation of the persons involved.
Read more →The HV installation is touch-safe, can everyone enter?
No, not everyone. According to NEN 3840, at a touch-safe installation, one person may enter the room with at least a VOP designation. If the installation is not touch-safe, two persons are required, of which at least one is a VP. The ENSR uses similar but slightly different rules.
Read more →Are online courses suitable for me?
Online courses are ideal for experienced technicians who want to refresh their knowledge or renew an expired certificate. For beginners, a classroom course is often better. Both options are available at Euronorm Advies.
Read more →NEN 3840 Courses – Industry
NEN 3840 HV IV-WV Course – Installation and Work Supervisor (Industry)
For managers working near high-voltage installations in industry. Online, with certificate.
View course →NEN 3840 HV VP Course – Competent Person (Industry)
For electrical technicians working on or near high-voltage installations in industry. Online, with certificate.
View course →NEN 3840 HV VOP Course – Instructed Person (Industry)
For non-electrical personnel working near high-voltage installations in industry. Online, with certificate.
View course →Courses NEN 3840 – Industry
Course: IV-WV NEN 3840 HV – Installation and Work Supervisor (Industry)
For supervisors working near high-voltage installations in industry. Online, with certificate.
View course →Course: VP NEN 3840 HV – Competent Person (Industry)
For electricians working on or near high-voltage installations in industry. Online, with certificate.
View course →Course: VOP NEN 3840 HV – Instructed Person (Industry)
For non-electrical personnel working near high-voltage installations in industry. Online, with certificate.
View course →Courses NEN 3840 – Wind Farms
Course: NEN 3840 IV-WV – Installation and Work Supervisor (Wind Farms)
For Installation and Work Supervisors at wind farms. Covers NEN 3840, ENSR, arc flash, PPE, isolation and supervision. Online, with certificate.
View course →Course: NEN 3840 VP – Competent Person (Wind Farms)
For electricians at wind farms working on or near high-voltage installations. Online, with certificate.
View course →Course: NEN 3840 VOP – Instructed Person (Wind Farms)
For non-electrical personnel at wind farms near high-voltage installations. Covers NEN 3840, ENSR, arc flash, PPE and safety rules. Online, with certificate.
View course →View our full course offering
From NEN 3140 to ATEX — everything available online with a certificate.
Do you have questions about NEN 3840 or would you like advice or practical support or are you wondering which course suits your situation or would you like custom-made, then please contact us.
Richard Winter 0031 (0) 6 27 26 25 29 | richard@euronorm.net